US prices checked Nov 21, 2026 · scores from a public formula
Fit check
CockpitsWheelsBest ofFoldable cockpitsAluminum profile rigsWheel standsDirect drive wheel basesSim racing bundlesWhat a full setup costsAll rankingsBrandsNext Level RacingTrak RacerMatchupsDealsFit checkHow we rateContact
Trak Racer TR8 Pro V2, official product photo

Trak Racer TR8 Pro review

A 2-inch steel tube frame with a 30 Nm rating from its maker and a 45-minute build.

$594.15$699at Trak Racer, checked November 21, 2026 · Sale price shown on trakracer.com
8.2/10
Site score
How we rate
Supported torque8.9
Adjustability9.1
Upgrade path7.0
Price, seat included5.4
Footprint and storage6.0
Seat5.0

At a glance

Footprint: Not published
Weight: Not published
Stated torque: 30 Nm
Driver height: Not published
Verdict
  • 30 Nm is the highest maker-stated torque figure of any steel tube rig in our catalog.
  • Seat slider rails, oversized seat brackets and a gear shifter mount are included, which a bare profile frame often charges for.
  • The catch: fewer upgrade options than profile, and no published footprint.
Fit
  • Footprint L x W x H: Not stated
  • Weight: Not stated
  • Driver height: Not stated
  • Max driver weight: Not stated
Compatibility

Trak Racer says the 2-inch tube was strengthened to take up to 30 Nm of direct drive torque without flex.

In the box
  • TR8 Pro V2 frame in black or grey
  • Seat slider rails
  • Oversized seat brackets
  • Gear shifter mount
  • Sliding wheel mount
Warranty and seller
  • Warranty: Not stated on the product page
  • Price read at Trak Racer on November 21, 2026
  • Return terms are set by the seller: read them on the listing before you order

Short answerThe Trak Racer TR8 Pro V2 is the pick if you want a rigid cockpit without assembling aluminum profile: Trak Racer says its 2-inch steel tube takes up to 30 Nm of direct drive torque without flex and builds in about 45 minutes. It cost $594.15 on Nov 21, 2026 as a frame with seat slider rails and brackets, no seat.

Who it's for, and who should skip it

Buy it if

  • You run or plan a base between 9 and 25 Nm and want the frame rating in writing
  • You would rather tighten 30 bolts than 150: tube frames go together fast
  • You like the look of a welded frame and easy entry from the side

Skip it if

  • You want to keep adding parts for years: tube takes the mounts made for it, profile takes anything
  • You need formula seating: the Alpine Racing TRX is the Trak Racer tube rig for that
  • You are short on budget: with a seat this is an $850 cockpit

The verdict in three lines

  1. 30 Nm is the highest maker-stated torque figure of any steel tube rig in our catalog.
  2. Seat slider rails, oversized seat brackets and a gear shifter mount are included, which a bare profile frame often charges for.
  3. The catch: fewer upgrade options than profile, and no published footprint.

Will it fit your room, and will you fit in it?

Values published by Trak Racer, read on November 21, 2026. "Not stated" means the product page gives no figure.
Fit checkTrak Racer TR8 Pro
Footprint L x W x HNot stated
Floor areaNot stated
Folded sizeDoes not fold
WeightNot stated
Driver heightNot stated
Max driver weightNot stated
SeatNot included
FoldsNo

Trak Racer calls the TR8 Pro a small-footprint rig "to fit well in most small spaces" but does not print the length and width on the US product page. As with the TR80S, our footprint sub-score sits at a neutral 6 for that reason.

The wheel mount slides for reach and the pedal plate adjusts, and the seat brackets are sized for most fiberglass bucket seats. Optional brackets cover office-style and car-style reclining seats.

Which wheel base can it take?

Trak Racer says the 2-inch tube was strengthened to take up to 30 Nm of direct drive torque without flex.

Our reading of the maker's statement. Where no figure is published we say so.
Wheel base classOn the TR8 Pro
Up to 6 Nm (Logitech G923, MOZA R3 and R5, Thrustmaster T598)Yes, far inside the 30 Nm rating.
9 to 13 Nm (MOZA R9, R12)Yes. A MOZA R9 or R12 uses less than half of the stated limit.
16 Nm and up (MOZA R16 and R21 Ultra, Simagic Alpha EVO Pro)Yes up to 30 Nm: a MOZA R16 Ultra, R21 Ultra or Simagic Alpha EVO Pro (18 Nm) is inside the figure Trak Racer states.

Looking the other way, from the base to the frame? See which cockpit each direct drive base needs.

What's in the box, and what you'll add

  • TR8 Pro V2 frame in black or grey
  • Seat slider rails
  • Oversized seat brackets
  • Gear shifter mount
  • Sliding wheel mount
Prices read on November 21, 2026; they move, so check before you order.
You will also needCostNote
Seat$254.15Trak Racer RE2 reclining seat on Nov 21, 2026; GT Pro fiberglass bucket $296.65
Single monitor stand$92.65Cockpit-mounted stand for the TR8 Pro on Nov 21, 2026, list $109
Wheel base and pedalsfrom $269MOZA R9 base on Nov 21, 2026, wheel and pedals extra

Frame, RE2 seat and the single monitor stand came to $940.95 on Nov 21, 2026. The slider rails are already in the box, so nothing else is needed to sit down and drive.

TR8 Pro or TR160: which Trak Racer for a strong base?

Source: trakracer.com product pages, Nov 21, 2026.
TR8 Pro V2TR160 V5
Frame2-inch steel tube160 x 40 mm aluminum profile
Price on Nov 21, 2026$594.15 (list $699)$620.50 (list $730)
Stated torque supportUp to 30 NmNo figure published
Seat sliderIncludedIncluded
AssemblyAbout 45 minutes per Trak RacerNot stated
Add-onsMounts made for the TR8 ProAny 8 mm slot accessory, 30-plus listed

For $26 more the TR160 gives you profile and the upgrade freedom that comes with it. The TR8 Pro answers with a number and a faster build. If you know your base will stay under 30 Nm and you want to be driving the same evening, the tube frame is the simpler buy.

Trak Racer TR8 Pro: The TR8 Pro V2 as it ships: the bare 2-inch tube frame with its mounts.
The TR8 Pro V2 as it ships: the bare 2-inch tube frame with its mounts. Photo: Trak Racer.

What do owners say on the store page?

Trak Racer shows buyer reviews under the product. Three we read on Nov 21, 2026 are useful because they are specific. One buyer running a 25 Nm base wrote there was "no noticable flex even at 100%". Another called it a "solid, sturdy and heavy rig with very little flex" and added that it "takes a while to build" once you bolt your own parts on. A third reported "a few small bends and scratches on delivery" and said Trak Racer resolved it. Store-hosted reviews are moderated by the seller, so read them as a sample, not a survey.

Video: "TR8 Pro V2 Review – Is This the Best Value Rig Out There?", S. Raes on YouTube.

How long does the build take?

The product summary says "extremely rigid and fast, 45-minute assembly", and the description gives a 30 to 60 minute range. That is frame time. Mounting a base, pedals and a seat to your own measurements is where the evening goes, as the buyer above noted.

Trak Racer TR8 Pro: The TR8 Pro V2 built up; the seat, wheel and screen shown are sold separately.
The TR8 Pro V2 built up; the seat, wheel and screen shown are sold separately. Photo: Trak Racer.

What we could not confirm

  • Footprint and weight. The Shopify shipping weight is not a product weight, so we left it out.
  • Warranty length for the TR8 Pro V2: not stated on the page.
  • Which seat the black and the grey frame are pictured with; both colors were the same price.

How it compares with close rivals

Maker-published specs. US prices checked November 21, 2026.
SpecTrak Racer TR8 Pro cockpitTrak Racer TR8 ProTrak Racer TR160 cockpitTrak Racer TR160Sim-Lab GT1 Evo cockpitSim-Lab GT1 EvoPlayseat Trophy cockpitPlayseat Trophy
Score8.2/108.3/109.6/108.5/10
Price$594.15 on Nov 21, 2026$620.50 on Nov 21, 2026$449 on Nov 21, 2026$549 on Nov 21, 2026
TypeSteel tubeAluminum profileAluminum profileSteel tube
SeatNot includedNot includedNot includedIncluded
FoldsNoNoNoNo
Stated torque support30 NmNo figure published40 NmNo figure published
Footprint L x W x HNot statedNot stated53.1 x 22.8 x 26 in (135 x 58 x 66 cm)55.1 x 22.8 x 39.4 in (140 x 58 x 100 cm)
WeightNot statedNot stated86 lb (39 kg)35 lb (16 kg)
Driver heightNot statedNot statedUp to 7 ft 3 in3 ft 11 in to 7 ft 3 in
Max driver weightNot statedNot stated397 lb269 lb
BuyCheck price at Trak RacerCheck price at Trak RacerCheck price at Sim-LabCheck price at Amazon

Price on November 21, 2026

Trak Racer listed the Trak Racer TR8 Pro at $594.15 on November 21, 2026, next to a list price of $699. Sale price shown on trakracer.com. Prices change, sometimes within the week, so the button shows today's price at the seller.

Check price at Trak Racer

Full spec sheet

Source: Trak Racer product page, read on November 21, 2026.
SpecTrak Racer TR8 Pro V2
TypeSteel tube
Frame2-inch steel tube
SeatNot included
FoldsNo
Driving positionGT
Stated torque support30 Nm
Footprint L x W x HNot stated
Floor areaNot stated
Folded sizeDoes not fold
WeightNot stated
Driver heightNot stated
Max driver weightNot stated
WarrantyNot stated on the product page
Sold byTrak Racer

Questions buyers ask

How much torque can the Trak Racer TR8 Pro handle?

Trak Racer states that the 2-inch tube was strengthened to withstand up to 30 Nm of direct drive torque without flex.

Does the TR8 Pro include a seat?

No. It includes seat slider rails and oversized seat brackets. A Trak Racer RE2 reclining seat was $254.15 on Nov 21, 2026.

How long does the TR8 Pro take to assemble?

Trak Racer quotes about 45 minutes, within a 30 to 60 minute range, for the frame.

Is steel tube worse than aluminum profile?

Not for stiffness at this rating. The difference is adjustability: profile accepts any slot accessory anywhere, a tube frame accepts the mounts designed for it.

Keep comparing

Scores come from a public formula applied to maker-published specs and dated prices. Some links are affiliate links; see the affiliate disclosure.